Lanode.com

  • Increase font size
  • Default font size
  • Decrease font size
Home Interface Converters Serial V.35 Data Interface Converter

V.35 Data Interface Converter

E-mail Print

V.35 Data Interface Converter

V.35 Data Interface ConverterEnd of Life

The V35IP family of interface converters allows full bi-directional synchronous conversion between V.35 and X.21 or RS-449/530 hardware. These converters all work WITHOUT an EXTERNAL POWER SUPPLY. The V35IP interface converters are designed for synchronous V.35 operation at data rates up to and including 2048kbps. They may also be applied to asynchronous V.35 using only TD & RD signals, while ignoring TC, RC, and XTC timing signals. Asynchronous V.35 requires three times greater data throughput on the synchronous side's X.21 or RS-449/530 interface. The physical connections for all V35IP family converters are DB25 female connectors and V.35 adapter cable. The V.35 side requires the supplied DB25 to MB34 adapter cable to connect directly to V.35 equipment.

V.35 Data Interface Converter schematic

Features:

  • Electrically converters SYNC ITU-T V.35 to RS-530 / RS-449 / X.21 (three models)
  • DCE/DTE switch selectable
  • Data rate up to 2.048Mbps
  • Complies with ITU-T V.35, X.21 and EIA RS-449, RS-530
  • Interface powered, no external DC power required for the "IP" converter family
  • An external power adapter (9VDC@600mA) may be used if the application of the unit is in a poor communication environment

Specifications:

Data rate: Up to 2Mbps
Connector: DB25F with V.35, X.21, RS530, RS449 cable adapter
Indications: PWR, Signal status, DCE/DTE mode
Power Input: 9VDC
Power Consumption: < 5W
Dimensions: 140 x 80 x25mm (D x W x H)
Weight: 150g
Temperature: 0°C ~ 50°C (Operating), -10°C ~ 70°C (Storage)
Humidity: 10~90% non-condensing