Lanode.com

  • Increase font size
  • Default font size
  • Decrease font size
Home Power Substation & Transport IEC 61850 Ethernet Switches Gigabit Ethernet Switch for Power Substation

Gigabit Ethernet Switch for Power Substation

E-mail Print

Gigabit Ethernet Switch for Power Substation

Gigabit Ethernet Switch for Power Substation

IEC 61850-3

EN50121-4IEC1588u-Ring

The IPS-G803SM Managed Gigabit Ethernet Switch is designed to meet the demands of power substation systems and is fully compliant with the requirement of IEC 61850-3 and IEEE 1613. The switch provide a variety of redundant functions to increase the reliability of your communications system, including redundant and isolated power supplies (24/48 VDC) and 110/220 VDC/VAC), STP/RSTP/MSTP and ITU-T G.8032 Ethernet Ring Protection Switching (recovery time<50ms). It is compatible with other switches in the network for ring protection. The proprietary μ-Ring (with recovery time of less than 20ms) can work with a variety of our industrial managed switches for ring protection. The switch also provides many functions, such as Web management, SNMP, IGMP, VLAN, LACP, QoS, Security, IPv6, bandwidth control, port mirroring, cable diagnostics and Green Ethernet.

Gigabit Ethernet Switch for Power Substation schematic

Features:

  • 8 x 10/100/1000Base-T RJ-45 with 3x 100/1000Base-X SFP Fibre
  • UL60950-1, CE, FCC, certification
  • IEC61850-3, IEEE1613 certified for power substation
  • Redundancy isolated ±24/48 VDC power inputs (IPS-G803SM-DD)
  • Isolated ±24/48VDC and 110/240VDC/VAC power input (IPS-G803SM-AD)
  • Wide Operating Temperature -40~85°C
  • DIN Rail mounting or wall mounting
  • IP30 rugged metal housing
  • Cable diagnostic, Measuring cable OK or broken point distance
  • Supports IEEE802.3az EEE (Energy Efficient Ethernet) Management to optimize the power consumption
  • STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR), μ-Ring for cabling redundant
  • μ-Ring for Redundant Ethernet Ring, recovery time<20ms in 250 units
  • QoS, Traffic classification QoS, CoS, bandwidth control for Ingress and Egress, Storm Control, DiffServ
  • IEEE802.1Q VLAN, port based VLAN, MAC based VLAN, IP subnet based VLAN, Protocol based VLAN, VLAN translation, MVR
  • Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
  • IGMP/MLD snooping V1/V2/V3, IGMP Filtering / Throttling, IGMP query, IGMP proxy reporting, MLD snooping
  • Security : Port based and Mac based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
  • Software upgrade via TFTP and HTTP, redundant firmware in case of upgrade failure
  • Supports DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
  • Supports RMON, MIB II, Port mirroring, Event syslog, DNS, NTP/SNTP, IEEE802.1ab LLDP
  • Supports IPv6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP, TFTP, QoS, ACL
  • CLI, Web based management, SNMP v1/v2c/v3, Telnet server for management

Specifications:

IEEE Standard:

  • IEEE 802.3 10Base-T Ethernet
  • IEEE 802.3u 100Base-TX Fast Ethernet
  • IEEE 802.3ab 1000Base-T Gigabit Ethernet
  • IEEE 802.3z 1000Base-X Gigabit Ethernet
  • IEEE 802.1d STP
  • IEEE 802.1w RSTP
  • IEEE 802.1s MSTP
  • IEEE 802.1Q for VLAN Tagging
  • IEEE 802.1X for Authentication
  • IEEE 802.3ad for Port Trunk with LACP
  • IEEE802.3x Flow Control and Back Pressure
  • ITU-T G.8032/ Y.1344 EPR (Ethernet Protection Ring )
  • IEEE 802.1ad Stacked VLANs, Q-in-Q
  • IEEE 802.1p LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization
  • IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
  • IEEE 802.3az EEE (Energy Efficient Ethernet)

VLAN ID: 4096
IGMP Group: 256
Switch Architecture: Back-plane (Switching Fabric): 22Gbps
Data Processing: Store and Forward
Flow Control: IEEE 802.3x flow control, back pressure flow control
Jumbo Frame: 9.6KB
MAC Address Table: 8K

Network Connector:

  • 8x RJ-45
  • 10/100/1000Base-T auto negotiation speed
  • Auto MDI/MDI-X function, Full/Half duplex
  • 3x 100/1000Base-X dual speed mode SFP slot, with DDMI

Console: RS-232 (RJ-45)
Network Cable: UTP/STP above Cat. 5e cable; EIA/TIA-568 100-ohm (100m)
Protocols: CSMA/CD
LED:

  • Per unit : Power 1 (Green), Power 2 (Green), Fault (Amber)
  • Per RJ-45 port :10/100Link/Act: Green, 1000Link/Act: Amber
  • SFP Fibre Per port : Link/Active (Green)

Reverse Polarity Protection: Present for Power Input
Overload Current Protection: Present
CPU Watch Dog: Present
Power Input:

  • IPS-G803SM-DD : Redundant Isolated DC ±24/48V (±18~72VDC) Input power (Removable Terminal Block)
  • IPS-G803SM-AD : Redundant 1X Low Voltage Isolated DC and 1 High Voltage AC/DC; DC : Isolated ±24/48V  (±18~72VDC) Input power (Removable Terminal Block) AC : 88VAC~264VAC /DC85VDC~300VDC

Alarm Relay Contact: Relay outputs with current carrying capacity of 1 A @24VDC
Removable Terminal Block: Provide 2 redundant power, alarm relay contact, 6 Pin
Operating Temperature: -40°C~85°C
Operating Humidity: 5% to 95% (Non-condensing)
Storage Temperature: -40°C~85°C
Housing: Rugged Metal, IP30 Protection
Installation mounting: DIN Rail mounting or wall mounting
EMC/EMS: CE, FCC
EMI: FCC Part 15 Subpart B Class A; EN 55022 Class A

EMS:

  • EN61000-4-2 (ESD) Level 4, Criteria B
  • EN61000-4-3 (RS) Level 3, Criteria A
  • EN61000-4-4 (EFT) Level 4, Criteria A
  • EN61000-4-5 (Surge) Level 4, Criteria B
  • EN61000-4-6 (CS) Level 4, Criteria A
  • EN61000-4-8 (Magnetic Field) Level 5, Criteria A

Safety: UL60950-1 (Pending)
Power Substation: IEC 61850-3, IEEE 1613
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Weight: 0.885kg (IPS-G803SM-LL); 1.085kg (IPS-G803SM-HL)
Warranty: 5 years

 

How can we help?

Search

Live Demo of FRM220 Chassis

Related Products