Lanode.com

  • Increase font size
  • Default font size
  • Decrease font size
Home Products DSL ADSL Splitters
ADSL Splitters

CPE ADSL Splitter for ADSL over ISDN

E-mail Print

ALS-10-EU/ISDN CPE ADSL Splitter for ADSL over ISDN

CPE ADSL Splitter for ADSL over ISDN

The ALS-10-EU/ISDN is a low-cost, compact, low pass filter designed for ISDN-BA with 2B1Q or 4B3T baseband line codes coinciding with ADSL signals. It integrates a low pass filters that block the high frequency energy from reaching the ISDN-BA device and provides isolation from impedance effects of the ISDN-BA device on the ADSL modem. Because the ISDN splitter connects directly to the subscriber loop media, it must also provide some protection for externally induced line hits or faults which could damage to any attached equipment or endanger humans interacting with the installed equipment. The circuit protection will be provided mostly by standard central office line protection means and additional protection measures built into splitter to protect against line overstress which could damage the splitter itself. The electrical and transmission specifications are based on ETSI TS 101 952-1-3 V1.1.1 for ISDN-BA requirements.

Read more...
 

CPE ADSL Splitter, Field for ITA, UK, FI, FR

E-mail Print

ALS-10-IT CPE ADSL Splitter, Field for ITA, UK, FI, FR

CPE ADSL Splitter, Field for ITA, UK, FI, FR

The ALS-10 regional ADSL splitters are low-cost, compact, passive low-pass filters designed to provide POTS (Plain Old Telephone System) service to a line that is utilizing ADSL/VDSL technology and customized with regional country telephone plugs. This device is designed to eliminate interference to POTS equipment by blocking high frequency energy (20 KHz~12MHz). The ALS-10 provides point of entry filter to split the incoming line to the ADSL/VDSL modem and the POTS telephone.

Read more...
 

CPE ADSL Splitter / Micro-Filter

E-mail Print

ALS-12 / ALS-M12 CPE ADSL Splitter / Micro-Filter

CPE ADSL Splitter / Micro-Filter

The ALS-12 / ALS-M12 are low-cost, compact, passive low-pass filters designed to provide POTS (Plain Old Telephone System) service to a line that is utilizing ADSL/VDSL technology. This device is designed to eliminate interference to POTS equipment by blocking high frequency energy (20 KHz~12MHz). The ALS-12 provides point of entry filter to split the incoming line to the ADSL/VDSL modem and the POTS telephone. The ALS-M12 is a micro-filter designed to simply drop a POTS telephone off a line carrying ADSL/VDSL signal.

Read more...
 

ALS-R60 8U 20-Slot ADSL Splitter Rack

E-mail Print

ALS-R60 8U 20-Slot ADSL Splitter Rack

ALS-R60 8U 20-Slot ADSL Splitter Rack

The ALS-R60 is a 8U, 20 slot, 19(23)" rack mountable chassis for concentrated central office POTS splitters used in conjunction with ADSL DSLAMs. The chassis motherboard is available only with wire-wrap POTS and Line connections and HDB78 pin connectors for 32 loop per card DSLAMs. Each physical card provides 32 loops each of ADSL line splitters which provide low-pass filters designed to provide POTS (Plain Old Telephone System) service to a line that is utilizing ADSL technology. This device is designed to eliminate interference to POTS equipment by blocking the high frequency ADSL signal (20 KHz~12 MHz).

Read more...
 

CPE ADSL Splitter, MDF Low Pass Type

E-mail Print

ALS-P10 CPE ADSL Splitter, MDF Low Pass Type

CPE ADSL Splitter, MDF Low Pass Type

The ALS-P10 filters with Siemens/Krone type terminals, can be directly plugged into the existing terminals at central office one by one, as needed, thus eliminating need for extra terminal blocks and cabling. This leads to lower costs compared with ordinary splitters deployment, which requires operators to install large splitter racks and equipment awaiting presumable future use. With the ALD-P10, no extra cabling or terminal blocks are needed and with Krone LSA Plus terminals, only minor new cabling is needed. The plug type filters are easy to install onto the terminal blocks with no extra tools required. Filters act like disconnection plugs in that the contacts inside the terminal are disconnected and the filter connects in series to the loop pair. The plug type splitter requires the space of two pairs of LSA Plus terminal block. Individual filters can be plugged adjacent to each other and will not block neighboring pairs from insertion of new wires. Thus ADSL can be connected to subscribers independently.

Read more...
 

ALS-R50 6U 16-Slot ADSL Splitter Rack

E-mail Print

ALS-R50 6U 16-Slot ADSL Splitter Rack

ALS-R50 6U 16-Slot ADSL Splitter Rack

The ALS-R50 is a 6U, 16 slot, 19(23)" rack mountable chassis for concentrated central office POTS splitters used in conjunction with ADSL DSLAMs. The chassis motherboard is available in 4 different configurations, one with wire-wrap POTS, one with wire-wrap POTS plus DC blocking, one with IDC connector POTS and one with IDC connector POTS with DC blocking. Each physical card provides 24 loops. In the wire-wrap POTS configuration, the 24 loops of each card go directly to one group of connectors (POTS / Line / DSLAM). In the IDC connector based configuration, the 24 loop cards are grouped into sets of 4 cards or 96 loops. Therefore, IDC based configuration must be populated with 4,8,12 or 16 card sets. Each card set provides high density connections to the central office DSLAM using 2-50 pin (2.54mm pitch) locking header IDC connectors and cables. Each connector supports 24 loops. In the wire-wrap configuration, DSLAM connections are provided by 2-50 pin locking header IDC connectors while POTS and line connections are provided via two sets each of 12x4 wire wrap terminals.

Read more...
 



How can we help?

Search

Live Demo of FRM220 Chassis

Related Products