Lanode.com

  • Increase font size
  • Default font size
  • Decrease font size

Non-Managed GbE PoE Media Converter

E-mail Print

Non-Managed PoE Media Converters

IMC-1000-PH12 & IMC-1000S-PH12 Non-Managed PoE Media Converters

20-57VEN50121EN61000

The IMC-1000(S)-PH12 is a family of non-managed Gigabit Ethernet media converters that support conversion between electrical 10/100/1000Base-T and optical 1000Base-X Ethernet and as PSE (Power Source Equipment) provide PoE+ power over Ethernet. Two options are available for optical interfaces, the IMC-1000-PH12 uses a fixed optical transceiver operating at 1000Base-X, while the IMC-1000S-PH12 provides an SFP cage for 100/1000Base-X compatible SFP modules. Housed in rugged DIN rail or wall mountable enclosures, these converters are designed for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications.

Non-Managed PoE Media Converters schematic

Features:

  • Conversion between 10/100/1000Base-T and 100/1000Base-X Fibre cable interface
  • Supports dual rate (100/1000) SFP for selectable Fast or Gigabit speed on fibre
  • 12/24/48VDC (9.6~57VDC) redundant dual input power, and built-in power booster
  • Constant and regulated PoE output voltage at 55VDC
  • Provides IEEE802.3at PoE output (30Watts)
  • Support Remote PD reset by fibre port link down
  • Support LFP (Link Lose Forward)
  • IP30 rugged metal housing
  • Wide operating temperature -20~75°C (IMC-1000-PHE12, IMC-1000S-PHE12)
  • UL60950-1, CE, FCC, Railway traffic EN50121-4 certification
  • Industrial grade EMS,EMI EN61000-6-2, EN61000-6-4 certification
  • Supports Jumbo frame 9K bytes packet

Specifications:

Standards:

  • IEEE802.3 10Base-T
  • IEEE802.3u 100Base-TX
  • IEEE802.3u 100Base-FX
  • IEEE802.3ab 1000Base-T
  • IEEE802.3z 1000Base-SX/LX
  • IEEE802.3x Flow Control and Back pressure
  • IEEE802.3at Power over Ethernet+, PoE+
  • IEEE802.3af Power over Ethernet, PoE
  • IEEE802.1q Tag VLAN

RJ45 Ports: 10/100/1000Base-T
Fibre Ports: 100/1000Base-SX/LX (IMC-1000-PH12, IMC-1000-PHE12); 100/1000Base-X SFP (IMC-1000S-PH12, IMC-1000S-PHE12)
Data Process Architecture: Store and Forward mode or Pass Through mode Set by DIP SW
Jumbo Frame: 9K bytes
Fibre Parameters:

  • Fibre Cable (Multi-mode): 50/125um, 62.5/125um
  • Fibre Cable (Single-mode): 9/125um
  • Wavelength: 1310nm (Multi-mode/Single-mode)
  • Available distance:
    • 500M (Multi-mode SX), 20KM (Single-mode), 50KM(Single-mode) (IMC-1000-PH12, IMC-1000-PHE12)
    • SFP, Distance depend on plug-in Fibre Transceiver (IMC-1000SPH12, IMC-1000S-PHE12)

Link Fault Pass Through (LFPT):

  • TX- Fibre: If TX port link down, the media converter will force Fibre port to link down
  • Fibre-TX: If Fibre port link down, the media converter will force TX port to link down

DIP Switch:

  • ON: Disable Alarm For Power Loss; OFF: Enable Alarm For Power Loss
  • ON: Disable Alarm For Port Link-Failure; OFF: Enable Alarm For Port Link-Failure
  • ON: LFP Enable, OFF: LFP Disable
  • Data process Architecture:
    • ON : Pass through mode
    • OFF : Store and Forward Switch mode
  • Fibre Speed:
    • OFF: 1000Base-X
    • ON: 100Base-X
  • PoE Output:
    • OFF: Enable PoE output
    • ON: Disable PoE output
  • Remote PD reset:
    • Off : Disable Remote PD reset
    • On: Enable Remote PD reset by fibre port link down

Connector and Pin Assignment:

  • Fibre: SC (Multi-mode, 500M), SC (Single-mode, 20KM, 40KM) (IMC-1000-PH12, IMC-1000-PHE12)
  • SFP Slot (IMC-1000S-PH12, IMC-1000S-PHE12)
  • RJ-45 Socket: CAT-3/5 (10/100/1000Mbps) Twisted Pair cable
  • Auto MDI/MDI-X and Auto-Negotiation Function Support
  • RJ-45 Port support IEEE 802.3at/af End-Span, Alternative A mode.
  • PoE (V+): RJ-45 pin 1, 2.
  • PoE (V-): RJ-45 pin 3, 6.
  • Data (1,2,3,6,4,5,7,8)

LED:

  • Per Unit :Power 1 (Green ) ,Power 2 (Green) ,Fault (Amber )
  • Fibre LNK/ACT (Green): ON: Connected to network, OFF: Not connected to network , BLK: Receive /Transmit Data
  • Fibre Speed: Yellow : 1000Base-X, Green : 100 Base- X
  • RJ-45 Port: Speed: 10 (OFF), 100 (Green), 1000 (Yellow)
  • LNK/ACT for RJ45(Green): ON: Connected to network, OFF: Not connected to network, BLK: Networking is active
  • PoE Status (Green): Flash: PoE Fault (Over-load or short ), ON: PoE normal working, OFF: PoE No Power output

Reverse Polarity Protection: Present for Power Input
Overload Current Protection: Present
Power Supply: 12/24/48VDC (9.6~57VDC), Redundant power with polarity reverse protect function and removable terminal block
Alarm Relay Contact: Relay outputs with current carrying capacity of 1 A @24VDC
Removable Terminal Block: Provide 2 redundant power, alarm relay contact, 7 Pin
Operating Humidity: 5%~95% (Non-condensing )
Operating Temperature: -10°C~60°C (IMC-1000-PH12, IMC-1000S-PH12); -20°C~75°C (IMC-1000-PHE12, IMC-1000S-PHE12)
Storage Temperature: -40°C~85°C
Housing: Rugged Metal, IP30 Protection
Dimensions: 106 x 38.6 x 142 mm (D x W x H)
Weight: 655g (IMC-1000-PH12, IMC-1000-PHE12); 650g (IMC-1000S-PH12, IMC-1000S-PHE12)
Installation: DIN Rail mounting or wall mounting
EMC: CE
EMI: FCC Part 15 Subpart B Class A, CE EN 55022 Class A
Rail Way Traffic: EN50121-4
Immunity for Heavy Industrial environment: EN 61000-6-2
Emission for Heavy industrial environment: EN 61000-6-4
EMS (Electromagnetic Susceptibility) Protection level:

  • EN61000-4-2 (ESD) Level 3, Criteria B
  • EN61000-4-3 (RS) Level 3, Criteria A
  • EN61000-4-4 (EFT) Level 3, Criteria A
  • EN61000-4-5 (Surge) Level 3, Criteria B
  • EN61000-4-6 (CS) Level 3, Criteria A
  • EN61000-4-8 (PFMF) Field strength 300A/m Criteria A

Safety: UL60950-1 (pending)
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF: 419,822Hrs (IMC-1000-PH12, IMC-1000-PHE12); 432,104Hrs (IMC-1000S-PH12, IMC-1000S-PHE12); MIL-HDBK-217
Warranty: 5 years

 

How can we help?

Search

Live Demo of FRM220 Chassis

Related Products