Lanode.com

  • Increase font size
  • Default font size
  • Decrease font size
E1 G.703

2U 20-slot E1/T1 Cross Rate Converter Rack

E-mail Print

ETRM01 2U 20-slot E1/T1 Cross Rate Converter Rack

2U 20-slot E1/T1 Cross Rate Converter Rack

The ETRM01 is a 2U 19 (23)" concentrator rack for E1 and T1 Cross Rate Converters in central office installations. There are 20 slots available for hot swappable FTEC cards. An optional SNMP card can be installed into the first slot for configuration and management, leaving 19 slots available for FTEC cards. The SNMP card provides both local control via an RS-232 serial console port and remote IP management using Telnet, web GUI, SNMP protocol. Each E1 card may be linked to a remote E1/T1 PABX or a stand-alone FTEC Unit. The ETRM01 accommodates an optional second hot swappable shared power supply module which may derive power from AC (100-240) or DC (-48V) power sources. On the front panel of FTEC, combinations of BNC and RJ-45 connectors are utilized for E1 and T1 Line interface connections.

Read more...
 

Data to Fractional E1

E-mail Print

Data to Fractional E1

Data to Fractional E1

The FRM220-E1/DATA slide in card DSU/CSU is a digital access unit for Unframed or Fractional E1 services. The FRM220-E1/DATA data channel supports user-selectable transmission rates via selected E1 timeslots, which provides integral multiples of 64kbps or 56kbps, up to a maximum 2.048Mbps (unframed), for a line attenuation of up to 43 dB on twisted pair or coax cable. This  provides an approximate operating range up to 2km (using 22AWG). The FRM220-E1/DATA front panel provides status LEDs for monitoring the CSU and DSU conditions for initiating local and remote loopback with integral BERT. The FRM220-E1/DATA features a Data cable adapter for connection to industry standard routers. When the FRM220-E1/DATA card is Placed in the FRM220 rack with SNMP management, in-band management allows viewing the card and remote converter’s status, type, version, link status, data link status and alarms. Both card and remote can be configured to enable or disable the port, reset the port, set the data rate, modify the clock mode and initiate local or far end loop back test.

Read more...
 

E1 Ethernet Bridge

E-mail Print

FRM220A-Eoe1 - Ethernet over E1

E1 Ethernet Bridge

The FRM220A-Eoe1 is an Ethernet over E1 bridge and is part of the FRM220 family of interface converters and fibre optic line drivers. The FRM220A-Eoe-1, when used in pairs, enables users to connect 2 Ethernet networks together over an E1/G.703 link. The LAN interface on the unit is presented as a single 10/100BaseTX RJ45 connector and the E1/G.703 interface is presented as either a pair of 75 ohm BNC connectors or a 120 ohm RJ45 connector. The FRM220A-Eoe-1 has the capability to be connected to both unframed 2.048Mbps E1 interfaces as well as fractional n x 64Kbps E1 services.

Read more...
 

Ethernet over unframed E1 w/SNMP

E-mail Print

EOE1A Ethernet over unframed E1 w/SNMP

Ethernet over unframed E1 w/SNMP

The EOE1A is a Channel Service Unit for unframed ITU-T G.703 E1 that features a built-in Ethernet bridge. The CSU has a built-in Network Terminating Unit (NTU) and may connect to either 75 Ohm unbalanced, BNC connectors or to 120 Ohm balanced, unframed E1 via twisted pairs and a shielded RJ-45 connector. The EOE1-A Ethernet Bridge uses HDLC encapsulation to transport Ethernet packets across the WAN and supports 10/100 auto-negotiation or manual settings for 10M, 100M, Full or Half Duplex Ethernet. The Ethernet port also supports a standard auto-MDIX feature that will completely eliminate Ethernet cross-over cables or the guessing that is sometimes involved in choosing a cable when connecting to a HUB or a PC. The EOE1-A is very easy to configure by a menu driven serial console interface. SNMP and proprietary MIB add the ability to manage the EOE1-A centrally through third party network management software.

Read more...
 

E1/T1 Cross Rate Converter

E-mail Print

E1/T1 Cross Rate Converter

E1/T1 Cross Rate Converter

The FRM220-FTEC is a slide-in card E1/T1 converter and timeslot cross connect which enables conversion between one T1 signal and one E1 signal. T1 and E1 signals with frames employ u-Law and A-Law compander encoding principles respectively and encode those analog signals into 64kbits digital data. The E1 interface supports CCS (PCM31) or CAS (PCM30) frames with or without CRC-4 and with HDB3 line coding. The T1 interface supports D4 or ESF frame formats with B8ZS or AMI line code. Multiple clock source selection provides maximum flexibility in connecting both T1 and E1. The clock source may be from the T1 recovery clock, from the E1 recovery clock, from the internal oscillator, from an external clock or via transparent timing. All setup controls can be performed via internal DIP switch settings or via the RS-232 console port and ASCII terminal. Tests and diagnostics can easily be performed from the front panel push button switches.  Diagnostics include T1 local/remote and E1 local/remote loop back.

Read more...
 

ETU/TTU Interface Modules

E-mail Print

ETU/TTU Interface Modules

ETU/TTU Interface Modules Family Access Units

When purchasing one of our single or multi-port access units or multiplexers that support user replaceable interface modules, our ETU/TTU interface modules provide easily selectable electrical interfaces for a wide selection of user applications. In addition to standard datacom interfaces such as V.35, RS-530, X.21, RS-449, etc. Ethernet modules are also available for bridging or routing of Ethernet over E1 or T1 network services. The family of interfaces are summarised below:

Read more...
 

Single Modular Port E1 CSU/DSU

E-mail Print

ETU011 Single Modular Port E1 CSU/DSU

ETU011 Single Modular Port E1 CSU/DSU

The ETU011 stand-alone DSU/CSU is a digital access unit for Unframed E1, Fractional E1, or Fractional cascaded E1 service. The ETU01 data channel supports user-selectable transmission rates via randomly selected E1 timeslots, which provides integral multiples of 64kbps, up to a maximum 2.048Mbps (unframed), for a line attenuation of up to 43 dB on twisted pair or coax cable. This provides an approximate operating range up to 2km (using 22AWG). The ETU01 packs the data channels into the E1 link in user-selected time slots. The unused time slots can insert IDLE code (in frame mode).

Read more...
 

Single Modular Port E1 CSU/DSU w/ LCD and SNMP

E-mail Print

ETU01A Single Modular Port E1 CSU/DSU w/ LCD and SNMP

Single Modular Port E1 CSU/DSU w/ LCD and SNMP

The ETU01A single port stand-alone DSU/CSU provides our best digital access solution for E1 and Fractional E1 network services termination. A DTE device may be linked to an ETU01A at data rates of 56Kbps to 2048Kbps. The ETU01A features user replaceable dataport modules for a number of interface standards; including Ethernet bridge, router, V.35, X.21, RS-530, RS-449, G.703 64Kbps Co-directional and RS-232. The ETU01A supports local control and diagnostics via LCD display, keypad and LED status indicators located on the front panel as well as via a menu driven RS-232 console port in conjunction with a standard terminal. These features enable users to easily configure the unit, execute the in-service diagnostics and monitor the network status. The ETU01A provides optional SNMP (Simple Network Management Protocol), which allows the user to remotely control, diagnose and monitor the system using industry standard SNMP protocol, our proprietary MIB-II, and any network management software.

Read more...
 

Managed G.703 E1 CSU/DSU Concentrator

E-mail Print

ERM01 Managed G.703 E1 CSU/DSU Concentrator

ERM01 Managed G.703 E1 CSU/DSU Concentrator

The ERM01 is a 4U 19(23)" concentrator rack type E1 DSU/CSU for Fractional and Unframed G.703 E1 Access for central office installations. There are 13 slots available for hot swappable G.703 E1 cards. An optional SNMP card can be installed into the last slot for configuration and management, leaving 12 slots available for G.703 cards. The SNMP card provides both local control via an RS-232 serial console port and remote IP management using Telnet or industry standard SNMP protocol. Each E1 card may be linked to a remote E1/FE1 stand-alone Access Unit for various LAN, Data, or hosts over E1 network services. The ERM01 accommodates an optional second hot swappable shared power supply module which may derive power from AC (90-250) or DC (-48V) power sources. On the rear panel, combinations of BNC, RJ-45 and wire-wrap terminals are utilized for E1 Line interface connections. Adapter cables are used to convert the HDB26F DCE data ports to V.35, RS-530, RS-449, X.21 or 10/100 Base Ethernet depending on the installed card.

Read more...
 



How can we help?

Search

Live Demo of FRM220 Chassis

Related Products