2x 10/100/1000Base-T + 2x 100/1000Base-X SFP GbE Switch

CT-FRM220A-1002ES

Dual copper and dual fibre Gigabit Ethernet switch
Bandwidth control, duplex and speed configuration,VLAN tagging, Q-in-Q, QoS, jumbo frames as well as auto laser shutdown, and link fault pass through.
Local management (Monitor or Configure status) via SNMP
See also FRM220A-2000EAS/2

Overview

The FRM220A-1002ES is a 4 port, dual copper and dual fibre, Gigabit Ethernet switch designed to make conversion between 10/100/1000Base-T and 100/1000Base-SX/LX SFP's. With SNMP and Web-based management in the FRM220 or FRM220A chassis the network administrator can monitor, configure and control the activity of each FRM220A-1002ES switch card locally via the chassis management.

Based on a powerful L2 switch architecture, this converter supports bandwidth control, duplex and speed configuration, VLAN tagging, Q-in-Q, QoS, jumbo frames as well as auto laser shutdown, and link fault pass through. When used stand-alone, this card may be managed via local serial console port in a CH01M single slot chassis.

Data Sheet

CTCE-FRM220A-1002ES-LA.pdf

Specifications

Item	Description
Optical Interface	Connector SFP LC Data rate 125Mbps, 1250Mbps Duplex mode Full duplex Fibre MM 50/125μm, 62.5/125μm SM 9/125μm Distance MM 2km, SM 15/30/50/80/120km WDM 20/40/60/80km Wavelength MM 1310nm, SM 1310,1550nm WDM 1310Tx/1550Rx (type A) 1550Tx/1310Rx (type B)
Standards	IEEE 802.3, IEEE 802.3u, 802.3z, 802.3ab, 802.1Q, 802.3X, 802.1ad
Indications	PWR, LNK1, LNK2, TEST, LAN Link, LAN SPEED
Certification	FCC Part 15 Class A, CE Mark
Electrical Interface	Connector RJ45 Data rate 10Mbps, 100Mbps, 1000Mbps Cable 10Base-T Cat.3, 4, 5, UTP 100Base-TX Cat.5, 5e or higher 1000Base-X Cat.5e or higher
Power	12VDC
Power Consumption	< 12W
Dimensions	Card: 155 x 20.8 x 88mm (DxWxH)
Weight	130g
Temperature	0~50°C (Operating), -10~70°C (Storage)
Humidity	0 ~ 95% non-condensing